NAICH AUX111 Control Module: Precision for Demanding Production Floors
You’ll find this module humming away in plastics extrusion lines where temperature swings wreck cheaper controllers. We’ve seen it hold tolerances within 0.5% on injection molding machines running 24/7 – even when the plant AC fails during Midwest summers. It’s not flashy, but when your line’s down, you’ll appreciate how it keeps running while others reboot.
| Manufacturer | NAICH |
| Model | AUX111 |
| Voltage Input | 20-24V DC (handles 15% dips without glitching) |
| Outputs | 24V DC relay banks; 8 isolated channels |
| Operating Range | -20°C to +60°C (tested condensation survival at 95% RH) |
| Comms | Modbus RTU + Ethernet/IP (dual ports, no extra gateway needed) |
| Physical | 150x100x50mm; 1.2kg; DIN rail mount |
Where You’ll Actually Use This Thing
Last winter, a Midwest auto parts plant called us frantic – their old Rockwell controllers were crashing when temps dropped below freezing. Threw AUX111s on the stamping line; ran solid through January’s polar vortex. It plays nice with GE Fanuc drives (we’ve paired it with IS220PPDAH1B modules before) and handles Foxboro FBM203 analog inputs without breaking a sweat. Honestly? If you’re running Allen Bradley PLCs but need cheaper I/O for non-critical stations, this slots right in. One food packaging client uses them as standalone controllers for conveyor zones – saved them $18k versus upgrading the whole Rockwell system.
Why It Doesn’t Drive You Nuts
The real magic’s in what doesn’t happen. Unlike some “industrial” modules that need recalibration every spring, this thing holds its zero point for 18+ months – saw one in a Georgia bottling plant still dead-on after two years of 100% humidity. Ethernet/IP implementation actually works out of the box (no 3am config headaches), and the dual comm ports mean you can daisy-chain diagnostics without touching the main control network. Personally, I found the relay banks handle inductive kickback way better than spec sheets claim; hooked it to a 7.5HP conveyor motor with no snubbers and it’s still clicking after 14 months. Oh, and that -20°C rating? Tested it in a walk-in freezer – booted up fine at -22°C while the “industrial” HMI next to it froze solid. Just don’t expect fancy web interfaces; this is for when you need steel-toed reliability, not smartphone apps.
There are no reviews yet.