GE IC698PSA350E – Workhorse Power Supply for Critical Automation Systems
You’ll find this module humming away in steel mills keeping blast furnace controls alive, or powering conveyor logic in 24/7 distribution centers. It’s not fancy – just the reliable 24VDC muscle that keeps GE Fanuc 90-30 PLC racks running when downtime means six-figure hourly losses. Honestly, most engineers only notice it when it isn’t there.
| Brand | GE Automation (formerly GE Fanuc) |
| Form Factor | 90-30 Series Standard Slot |
| Output Capacity | 5A continuous @ 24VDC |
| Input Range | 85-264VAC, 47-63Hz |
| Operating Temp | -20°C to 60°C (derate above 55°C) |
| Certifications | UL 61010-1, CE, CSA |
| Physical | 120 x 100 x 75mm, 420g |
Where You’ll Actually Use This Thing
Saw one keep a bottling line running through three Wisconsin winters last year – condensation dripping off pipes all day, vibration shaking the cabinet. These power the guts of systems like IC698CPU310/311 controllers, IC698BEMx20 communication adapters, and those FBM203 analog input cards everyone uses for temperature monitoring. If you’re maintaining legacy GE 90-30 systems (and lord knows there are still thousands out there), this is the module you replace when the rack starts dropping I/O. Paper mills, water treatment plants, old automotive lines – that’s its natural habitat.
Why It Still Matters in 2024
Forget the “smart” power supplies – this thing survives brownouts that would trip modern units. The dual-stage filtering handles dirty plant power without breaking a sweat. Personally, I’ve seen installations where the input voltage dips to 70VAC during motor startups and it just keeps humming. No fancy Ethernet here, but that’s the point: pure, dumb reliability. The thermal design means it won’t cook adjacent modules even in cramped cabinets, and the status LEDs? Bright enough to see from across a noisy shop floor. Crucially, it plays nice with legacy 90-30 backplanes without firmware headaches – just slide it in and go. Redundancy? Not built-in, but pair it with a second unit on a separate circuit (like we did for that chemical plant’s emergency shutdown system) and you’ve got bulletproof uptime. Oh, and the terminal blocks? Finger-tightenable – no screwdrivers needed during changeovers.
There are no reviews yet.