SCHNEIDER TFTX11702 Industrial Touchscreen Control Panel for Demanding Automation Environments
You’ll find this panel right where things get messy – on packaging lines handling oily containers, inside chemical plants with corrosive vapors, or out in the field where temperature swings hit hard. The TFTX11702 isn’t just another HMI; it’s the one operators actually trust when gloves are wet or shift changes happen fast. Honestly, I’ve seen maintenance crews keep these running for years past warranty because the interface just doesn’t quit when you need it most.
| Attribute | Specification |
| Brand | Schneider Electric |
| Display | 10.4″ TFT LCD, 800 x 600 pixels |
| Environmental Rating | IP65 front panel (dust/water resistant) |
| Power Requirements | 24V DC ±15%, 2.5A max |
| Physical Dimensions | 277mm W × 224mm H × 65mm D |
| Operating Range | -10°C to 55°C ambient |
| Connectivity | RS-232, RS-485, 10/100Mbps Ethernet |
| Weight | Approx. 3.5 kg (with mounting brackets) |
Last month a dairy plant called us because their old HMIs kept failing during washdowns – turns out the TFTX11702’s sealed front panel handled the high-pressure sprays just fine where others leaked. We see this panel everywhere: cement mixers needing vibration resistance, pharmaceutical clean rooms requiring smooth surfaces, even on remote pump stations where temps drop below freezing. Besides the TFTX11702, we regularly handle Schneider’s Magelis GTU series, Modicon M580 CPUs, and Altivar drives – plus all those GE Fanuc IC695 modules and Triconex safety systems folks keep asking about.

Here’s what really matters on the floor: that 800×600 display stays readable under bright warehouse lights without glare, and the touchscreen responds reliably even with oily gloves – no waiting for calibration like some cheaper units. Personally, I found the Ethernet port’s auto-negotiation saves hours during retrofits; it just talks to existing Modbus TCP networks without fuss. The aluminum housing dissipates heat better than plastic alternatives we’ve tested, which explains why these last through summer heatwaves in Texas plants. And while it won’t replace a full redundant system, the dual serial ports let you daisy-chain critical sensors so one failure won’t blind the whole line. Maintenance crews appreciate the tool-less front bezel too – swapping a damaged screen takes less time than brewing coffee.








There are no reviews yet.